Cisco 1841 router configure adsl on HWIC-4ESW fasthethernet port

we have two WAN links one SHDSL and one ADSL, and My question:

How to configure Fasth Ethernet Port to be WAN ADSL link with public static address on
HWIC-4ESW on Cisco 1841 router?
Ps.
Adsl modem work in Bridge mode
brankob2Asked:
Who is Participating?
 
ping2vohraCommented:
Use thes of cmmand for interfaces


interface Dialer1
 ip address negotiated
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 dialer pool 1
 dialer-group 1   (add this command)
 ppp authentication pap callin
 ppp pap sent-username xxx password xxx

verfiy NAT command for Dialer . is correct or not.
0
 
lruiz52Commented:
Will you post your current sanitized config?
0
 
brankob2Author Commented:
my configuration

! No configuration change since last restart

interface FastEthernet0/0
 description SHDSL
 mac-address xxxx.xxxx.xxxx
 ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
 duplex auto
 speed auto
!
interface FastEthernet0/1
 description Uplink prema WiFi
 mac-address xxxx.xxxx.xxxx
 ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
 ip ospf network non-broadcast
 duplex auto
 speed auto
!
interface FastEthernet0/1/0
!
interface FastEthernet0/1/1
 description ADSl internet link Eunet
 pppoe enable group global
 pppoe-client dial-pool-number 1
 no cdp enable
!
interface FastEthernet0/1/2
 description Voip
 switchport access vlan 11
!
interface FastEthernet0/1/3
 description LAN
 switchport access vlan 10
!
interface Vlan1
 no ip address
!
interface Vlan10
 description Farmalogist NS LAN
 ip address xxxxxxxxxx
 ip helper-address xxxxxxx
!
interface Vlan11
 description Voip NS
 ip address xxxxxxxxxxx
!
interface Dialer1
 ip address negotiated
 ip mtu 1492
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 dialer pool 1
 ppp authentication pap
 ppp pap sent-username xxxxxx password xxxxxxx
!
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.