<div>
From the top of my head: you'd need a 2300 for those. Have a look at: <a href="http://www.cisco.com/en/US/products/hw/routers/ps2883/prod_installation_guides_list.html" rel="ugc">http://www.cisco.com/en/US/products/hw/routers/ps2883/prod_installation_guides_list.html</a>
</div>


From the top of my head: you'd need a 2300 for those. Have a look at: http://www.cisco.com/en/US/products/hw/routers/ps2883/prod_installation_guides_list.html [http://www.cisco.com/en/US/products/hw/routers/ps2883/prod_installation_guides_list.html]

<div>
What about the RPS 600 which i have ? Is it useless ?
</div>


What about the RPS 600 which i have ? Is it useless ?

<div>
As far as I can see it's 'useless' in combination with these types of switches, unless someone wants to correct that.
</div>


As far as I can see it's 'useless' in combination with these types of switches, unless someone wants to correct that.

<div>
even if i purchase cable 22-12 pin right ? because i found there is cable 22-12 pin<br />
<br />
thanks,
</div>


even if i purchase cable 22-12 pin right ? because i found there is cable 22-12 pin

thanks,

<div>
Hi,<br />
<br />
Thanks for your help, i have around 3 devices (RPS 600) so do you think to purchase one cable and try (i have to check the price on eBay), do you know some one on cisco to get the correct answer before purchasing the cable and waste the money !<br />
<br />
Many thanks again for your help and your support.
</div>


Hi,

Thanks for your help, i have around 3 devices (RPS 600) so do you think to purchase one cable and try (i have to check the price on eBay), do you know some one on cisco to get the correct answer before purchasing the cable and waste the money !

Many thanks again for your help and your support.

<div>
<div class="content wysiwyg-content">
Hi,<br />
<br />
<br />
I have CISCO RPS 600 (PWR600-AC-RPS) is it support Catalyst 2960G and 3560G ? and which type of cable require since i have cable 22-18 pin coming with RPS and on my switch require 22-14 pin, please can i know the cable model ?<br />
<br />
Thanks,
</div>
</div>


Hi,


I have CISCO RPS 600 (PWR600-AC-RPS) is it support Catalyst 2960G and 3560G ? and which type of cable require since i have cable 22-18 pin coming with RPS and on my switch require 22-14 pin, please can i know the cable model ?

Thanks,

CISCO RPS

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

Networking is the process of connecting computing devices, peripherals and terminals together through a system that uses wiring, cabling or radio waves that enable their users to communicate, share information and interact over distances. Often associated are issues regarding operating systems, hardware and equipment, cloud and virtual networking, protocols, architecture, storage and management.

Networking

Networking hardware includes the physical devices facilitating the use of a computer network. Typically, networking hardware includes gateways, routers, network bridges, modems, wireless access points, networking cables, line drivers, switches, hubs, and repeaters. But it also includes hybrid network devices such as multilayer switches, protocol converters, bridge routers, proxy servers, firewalls, network address translators, multiplexers, network interface controllers, wireless network interface controllers, ISDN terminal adapters and other related hardware.