Link to home
Create AccountLog in
Avatar of dssisupport
dssisupport

asked on

Wrong drive selected as PrimaryVolume

I am creating an InstallShield setup that requires that the main installation directory be the root of the main hard drive. I have the install directory set to PrimaryVolume in the InstallShield project. The setup works fine if I only have one hard disc installed but if there is more than one disc it does not choose the C: drive as the primary volume. It will choose the next highest drive letter, typically D or E. I am testing the setup on Windows 7 Pro, 32 bit OS. I have confirmed in the windows disk manager that Drive C: is the primray hard drive. InstallShield version is 2012 Professional. Any suggestions as to what I might be doing wrong?
ASKER CERTIFIED SOLUTION
Avatar of Merete
Merete
Flag of Australia image

Link to home
membership
Create an account to see this answer
Signing up is free. No credit card required.
Create Account
Avatar of dssisupport
dssisupport

ASKER

Yes, I am logged in with administrator rights. The two drives are both SATA drives. The boot drive is drive C: The second drive usually has a the most free space. I basically always want it to use Drive C:
I've requested that this question be closed as follows:

Accepted answer: 500 points for Merete's comment #a38435462

for the following reason:

This question has been classified as abandoned and is closed as part of the Cleanup Program. See the recommendation for more details.