Windows 7 failed startup disk repair

Windows 7 failed start-up disk repair.

I get a failed repair message when doing a Win7 repair.

Repair action: System files integrity check and repair
Result: Failed. Error code = 0x45d

Any ideas?
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

You may have to provide the drivers for the HD controller (you can usually put them on a USB stick), or check your BIOS settings, if there is an option to for the controller to be set to compatibility mode or IDE mode or something similar, change it to that setting. Then try the startup repair again.
here they got a fix - but i did not try it :

it is an I/O error :  Error Code 1117
System error code 1117 means "The request could not be performed because of an I/O device error." This error code may also display as "ERROR_IO_DEVICE" or as the value 0x45D.

disconnect all external devices -printers, scanners...
disconnect all extra disk and cd drives
test your disk drive with the disk diag for your disk brand, best download UBCD, make the CD and boot from it - run the diag from HDD section                              ultimate boot cd                        direct link UBCD

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
eclipsegemsAuthor Commented:
There are a few tools in the diag section, run all of them?
Become a CompTIA Certified Healthcare IT Tech

This course will help prep you to earn the CompTIA Healthcare IT Technician certification showing that you have the knowledge and skills needed to succeed in installing, managing, and troubleshooting IT systems in medical and clinical settings.

eclipsegemsAuthor Commented:
Running Emsa DiskCheck,

I get a number of:
Warning: Can't get attributes:
Error accessing drive:
Invalid procedure call or argument

Would this indicate a hard drive issue?
>>  a few tools in the diag section, run all of them  <<  NO, only the disk diag for your disk brand; if none is found, run DFT
eclipse gems, did you find the cause yet?
no need to close the Q before you found a solution
eclipsegemsAuthor Commented:
I found bad sectors with the WD program. It says it has fixed them, But re-scanning  I get the same bad sectors. This should be my issue
yes, that looks like your problem
what can help, is HDDRegenerator; run the free trial and check if it repairs the first sector :
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Windows 7

From novice to tech pro — start learning today.