Adding Perc Drivers for T7600 to MDT

I've done this on a T3600 with a H310 by injecting the driver into the driver store on our master image.
http://technet.microsoft.com/en-us/library/dd919234(v=ws.10).aspx

I am using the MDT and trying to PXE boot to the workstation.

Ohh - you didnt say that.  :)

So is the PC actually getting the image, or is the PERC not recognized when you attempt to deploy it down?

No the PC is not getting the image.  When attempt to deploy it  I don't think it is recognizing the drivers that I put in the WinPe folder.  The screen comes up and asks for disk say invalid disk.  I tried to get more information from the bdd.log but there was nothing there.  The error screen that appears after it errors out says it could be missing a storage driver.  But I have downloaded the drivers from the Dell site.

Sorry I didnt have any issues deploying my images with Ghost - my PC's got the image just fine, but would crash during sysprep. Then I had to inject the drivers into the driver store.

Lets see if any other Experts can chime in!

When you say that the PC does not got the image, do you mean that the PXE part fails?
Can you let us know what step of the boot/deploy process is failing?

Just one thing:
You need to add the host's NIC driver to your boot.wim (WinPE) image for this environment to be able to access the network resources. This is required when PXE booting.
Check this link:
http://www.deployvista.com/Blog/JohanArwidmark/tabid/78/EntryID/132/language/en-US/Default.aspx

The PXE part is fine.  I am having a problem during the load process of the image.  It does not recognize the physical drives.