Link to home
Create AccountLog in
Avatar of davidy2001
davidy2001

asked on

Configuring T1

Hi, A friend asked me to configure or troubleshoot T1. but I just know T1 concept. And have no idea on how to configure it. Usually what command need to be used for the configuration ?  Anyone can give me suggestion ?
ASKER CERTIFIED SOLUTION
Avatar of Ron Malmstead
Ron Malmstead
Flag of United States of America image

Link to home
membership
Create an account to see this answer
Signing up is free. No credit card required.
Create Account
Avatar of davidy2001
davidy2001

ASKER

Thank you so much for your fast reply. So, when T1 come to the building, The T1 needs an adapter( or called "smart jack") which connect Ethernet cable, right ? and at the client end, it do not need any configuration ?
SOLUTION
Link to home
membership
Create an account to see this answer
Signing up is free. No credit card required.
Create Account
Excellent answers !

"The configuration on a router interface, switch, or phone system...for example... depends on what type of provisioning the T1 has from the carrier when it was isntalled."    

---- So, what type of it can be configured ?
So, what type of it can be configured ?

I don't understand the question.
Sorry.  i was not clear

xuserx2000 said:  "The configuration on a router interface, switch, or phone system...for example... depends on what type of provisioning the T1 has from the carrier when it was isntalled."  

I want to know what kind of type of provisioning the T1 has from the carrier when it has installed

Thanks
Full T-1? Fractional T-1? Which timeslots are provisioned for data? Which timeslots are provisioned for voice?
SOLUTION
Link to home
membership
Create an account to see this answer
Signing up is free. No credit card required.
Create Account