Link to home
Start Free TrialLog in
Avatar of atsanders
atsandersFlag for United States of America

asked on

Juniper SSG5 "Unset" Command help

Hi Guys,

I apologize for my stupidity.
I need to change the IP addresses from the following configuration statements:

set interface ethernet0/0 vip interface-ip 3389 "RDP" 192.168.1.28
set interface ethernet0/0 vip interface-ip 80 "HTTP" 192.168.18.81
set interface ethernet0/0 vip interface-ip 21 "FTP" 192.168.18.81

When I use the command:

Unset interface ethernet0/0 vip interface-ip 3389 "RDP" 192.168.1.28

I receive “Unknown Keyword” in front of port 3389, (80 & 21 as well). My goal is remove the statement and re-enter the statement with correct IP.
 
Thank you!
Chip
ASKER CERTIFIED SOLUTION
Avatar of Qlemo
Qlemo
Flag of Germany image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
If you are unsure about the syntax of a command in CLI, it is best to get help by CLI itself:
   unset inter eth0/0 vip ?
and then going further stepwise.
Avatar of atsanders

ASKER

Excellent Qlemo.  Thanks for the information and tip. First time using CLI. I didn't have a clue.

Very much appreciate the quick responce and help!
Chip