[Last Call] Learn about multicloud storage options and how to improve your company's cloud strategy. Register Now

x
?
Solved

Help With Sonicwall Configuration with a COE

Posted on 2012-12-21
6
Medium Priority
?
189 Views
Last Modified: 2013-01-06
I have a Netvanta 838 that bonds dsl connections to one connection (Copper over Ethernet). I have been given from the ISP:

WAN IP
66.x.x.102 IP
66.x.x.101 GW
255.255.255.252 Subnet Mask

LAN IPs (usable static IPs)
205.x.x.50 thru 54
205.179.28.49 GW
255.255.255.248 Sub Mask

I have a Sonicwall TZ210 to use as a router/firewall. I want to continue to use my internal 10.x.x.x network (NAT) for the inside network. How do I program the Sonicwall ports (i need detailed as i am a beginner at this) to use the public LAN IPs(above) as the outside WAN IPs when I am using the above WAN IP for it? I am confused as I am used to just getting a set of IPs and using them (usually with a passthru other device/router) and then just plugging the IPs into the sonicwall.

Thanks for any help anyone can provide.
0
Comment
Question by:dleeodaniels
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 3
6 Comments
 

Author Comment

by:dleeodaniels
ID: 38714916
Im trying to this with just the sonicwall. I know I can use the hand off ethernet thru a router programmed WAN 66.x.x.102 then plug in the sonicwall to that and use WAN 205.x.x.50 with inside my internal LAN addresses. The question above, I am trying to this all with one Sonicwall and not have a middle man router.
0
 
LVL 25

Expert Comment

by:Tony Giangreco
ID: 38714977
You will need much more information than can be listed and understood from a forum like this. I suggest purchasing a Sonicwall support contract. They will connect to your firewall, upgrade the firmware, setup the config you need and you still have a year of support if you need adjustments. There are many companies that sell those contacts. We use Sonicwall and purchase support contracts for them also.

Hope this helps!
0
 
LVL 25

Expert Comment

by:Tony Giangreco
ID: 38718754
Have you make any progress on this? If you need help finding a company that discounts Sonicwall support contract, let me know. We purchase it for our clients all the time. I can refer you to our Sonicwall Distributor.
0
Concerto's Cloud Advisory Services

Want to avoid the missteps to gaining all the benefits of the cloud? Learn more about the different assessment options from our Cloud Advisory team.

 
LVL 25

Expert Comment

by:Tony Giangreco
ID: 38734502
Have you made any progress?
0
 

Accepted Solution

by:
dleeodaniels earned 0 total points
ID: 38735879
I have not, I just used the wan ip info instead of my 5 statics and that worked. I had to have it up that night so I didnt have more time to fool with it. Maybe sometime down the road ill figure it out the way it supposed to be, but for now it will do. Thanks, and if i do need a support contract I now have someone to contact.
0
 

Author Closing Comment

by:dleeodaniels
ID: 38748263
Figured it out temporarily on my own.
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

It happens many times that access list (ACL) have to be applied to outgoing router interface in order to limit some traffic.This article is about how to test ACL from the router which is not very intuitive for everyone. Below scenario shows simple s…
In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

656 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question