We value your feedback.
Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!
Course Of The Month
2 days, 17 hours left to enrollBecome a Premium Member and unlock a new, free course in leading technologies each month.
Solved
Problems with SSL VPN (SSL Web Proxy) with Draytek Vigor 2930 Router
Posted on 2012-12-22
Hello Experts
I would appreciate some help setting up my Draytek Vigor 2930 Router.
I am trying to setup SSL VPN access for my co-workers.
I am able to log in to the Draytek router via SSL VPN and select the SSL Web Proxy link, which then gives me a link to the intranet app running on IIS. When I click the link however a new browser window opens but the application never loads.
I have no problems connecting to the app via VPN with PPTP, etc. or port forwarding.
Any ideas what could be going on here?
Thanks so much,
Mike
I would appreciate some help setting up my Draytek Vigor 2930 Router.
I am trying to setup SSL VPN access for my co-workers.
I am able to log in to the Draytek router via SSL VPN and select the SSL Web Proxy link, which then gives me a link to the intranet app running on IIS. When I click the link however a new browser window opens but the application never loads.
I have no problems connecting to the app via VPN with PPTP, etc. or port forwarding.
Any ideas what could be going on here?
Thanks so much,
Mike
[X]
Welcome to Experts Exchange
Add your voice to the tech community where 5M+ people just like you are talking about what matters.
- Help others & share knowledge
- Earn cash & points
- Learn & ask questions
-
2
3 Comments
Please check the Access Method configuration & User Account Anthentication.
Please follow this link & let me know if this helps you. Also am attaching suer manual for SSL configuration.
http://www.draytek.co.uk/support/kb_vigor_ssl.html
UG-Vigor2930-V2.0.pdf
Please follow this link & let me know if this helps you. Also am attaching suer manual for SSL configuration.
http://www.draytek.co.uk/support/kb_vigor_ssl.html
UG-Vigor2930-V2.0.pdf
Thanks Sachin,
I verified the access method, authentication, read the manual and read the link you sent. I am able to get past the web proxy screen (but it is very slow) and enter my login details for the web based app. After I click "log in" I eventually see my name in the title bar of the browser but the remainder of the web page doesn't load. Incidentally, the web app is written in .NET, not sure if that could be contributing to the problem?
Thanks for your help,
Mike
I verified the access method, authentication, read the manual and read the link you sent. I am able to get past the web proxy screen (but it is very slow) and enter my login details for the web based app. After I click "log in" I eventually see my name in the title bar of the browser but the remainder of the web page doesn't load. Incidentally, the web app is written in .NET, not sure if that could be contributing to the problem?
Thanks for your help,
Mike
Featured Post
Question has a verified solution.
If you are experiencing a similar issue, please ask a related question
If you use NetMotion Mobility on your PC and plan to upgrade to Windows 10, it may not work unless you take these steps.
Arrow Electronics was searching for a KVM (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
- Networking Hardware-Other
- Switches / Hubs
- Components
- ATEN Technology
- Hardware
- *Kernel-based Virtual Machine (KVM)
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…
Suggested Courses
Course of the Month2 days, 17 hours left to enroll
695 members asked questions and received personalized solutions in the past 7 days.
Join the community of 500,000 technology professionals and ask your questions.