Solved

Esxi hp microserver: ilo or wol?

Posted on 2012-12-22
3
689 Views
Last Modified: 2012-12-23
Esxi hp microserver: ilo or wol?
I use wol now ...
0
Comment
Question by:janhoedt
  • 2
3 Comments
 
LVL 119
ID: 38716129
for a Microserver WOL.

for a real HP ProLiant Server series - iLo.
0
 

Author Comment

by:janhoedt
ID: 38716522
Thanks. Could you clarify why? I have a rac-card inside, are there advanrages over one technology to another?
0
 
LVL 119

Accepted Solution

by:
Andrew Hancock (VMware vExpert / EE MVE^2) earned 500 total points
ID: 38716706
A RAC card gives you remote Access, WOL is just Wake On LAN.

RAC is a very poor mans iLo.

iLo is a very advanced Out of Band Management Technology.

http://h18013.www1.hp.com/products/servers/management/remotemgmt.html?jumpid=servers/lights-out
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

HOW TO: Install and Configure VMware vSphere Hypervisor 6.5 (ESXi 6.5), Step by Step Tutorial with screenshots. From Download, Checking Media, to Completed Installation.
HOW TO: Upload an ISO image to a VMware datastore for use with VMware vSphere Hypervisor 6.5 (ESXi 6.5) using the vSphere Host Client, and checking its MD5 checksum signature is correct.  It's a good idea to compare checksums, because many installat…
Teach the user how to configure vSphere clusters to support the VMware FT feature Open vSphere Web Client: Verify vSphere HA is enabled: Verify netowrking for vMotion and FT Logging is in place or create it: Turn On FT for a virtual machine: Verify …
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…

821 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question