Solved

Windows 8 Vpn Access but no network

Posted on 2012-12-24
6
701 Views
Last Modified: 2013-02-05
Hi we have 2 windows 8 and both of them are able to connect to vpn but no network access

they were windows 7 and everything were fine ???
0
Comment
Question by:Mcklane
  • 3
  • 2
6 Comments
 
LVL 77

Expert Comment

by:Rob Williams
ID: 38718833
Most often the cause of this is the local network uses the same subnet as the remote, i.e. both use something like 192.168.1.x.  They must be different for routing to take place.  The symptoms are exactly as you describe.
0
 
LVL 93

Expert Comment

by:John Hurst
ID: 38719199
Also, what VPN client did you use in Windows 7 and what VPN client are you using in Windows 8?  Some VPN clients are not yet Windows 8 compatible.

.... Thinkpads_User
0
 
LVL 1

Author Comment

by:Mcklane
ID: 38721156
no its not the same subnet ...
its the windows client !
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 93

Expert Comment

by:John Hurst
ID: 38721170
Try using NCP Secure Entry. I use this on Windows 7 64-bit and it is supposed to work in Windows 8. It comes with a 30 day trial so it is worth a try.
... Thinkpads_User
0
 
LVL 1

Accepted Solution

by:
Mcklane earned 0 total points
ID: 38840517
Vipre  was the problem
0
 
LVL 1

Author Closing Comment

by:Mcklane
ID: 38854301
it was the solution ....  change vipre Business premium into business only
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

I've written this article to illustrate how we can implement a Dynamic Multipoint VPN (DMVPN) with both hub and spokes having a dynamically assigned non-broadcast multiple-access (NBMA) network IP (public IP). Here is the basic setup of DMVPN Pha…
Detailed instructions on how to install an Access add-in in recent versions of Office and Windows (with screen shots)
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question