emtechadmin
asked on
FORTIGATE
hi support team,
we are using EXCHANGE 2010 in our organization.NLB multicast configured on hub and cas array.Firewall we are using fortinet firewall.we are able to ping from our cisco switch to the nlb ip.But fortinet is not pinging to the cas array ip.
please advise
thanks
Emtech admin
we are using EXCHANGE 2010 in our organization.NLB multicast configured on hub and cas array.Firewall we are using fortinet firewall.we are able to ping from our cisco switch to the nlb ip.But fortinet is not pinging to the cas array ip.
please advise
thanks
Emtech admin
It depends on the network topology.... how firewall, router and exchange are connected to each other ?
I assume you mean you can't ping the CAS array from the firewall?
Can you do something like:
diag snif pack any "host IPTOBEPINGED" 4
in one console window on the FG, then in another start the actual ping with
exec ping IPTOBEPINGED
and post the output of the sniffer ...
Can you do something like:
diag snif pack any "host IPTOBEPINGED" 4
in one console window on the FG, then in another start the actual ping with
exec ping IPTOBEPINGED
and post the output of the sniffer ...
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
The issue is resolved .Problem with vmware configuration.I assigned 2 physical nic to each vms.after that its started working .