taking images from SCSI disk

crcsupport
crcsupport used Ask the Experts™
on
I have one SCSI drive pulled out from RAID1. The RAID is not stable, like to take a image from this disk.

I bought the exactly the same SCSI controller currently on the server and pulled out one of drive. Now I like to take an image.

I'm not familiar with SCSI. I don't know what type of disk cable I need and how to configure ID. Can anyone tell me about this how to do this?

Adaptec 2100S controller
Disk HP 146GB 15K RPM Wide Ultra320 disk.

I uploaded two images, one from connector of the controller and one from the disk. The disk doesn't have any jumper setting.
IMAG0105.jpg
IMAG0104.jpg
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
President
Top Expert 2010
Commented:
That disk has what is called a SCA connector.  You need an adapter so you can use it.   If you have a Fry's or decent computer retailer near you, ask for a SCA to 68-pin adapter.  Maybe $15.

Look here ...

http://www.obsolyte.com/faq/

The adapter has jumpers to set the ID, but the adaptec controllers standardize on ID #7 for the controller.  So just take off all the jumpers on the SCA adapter and it will assign ID #0 to your HDD.

The ID of everything just has to be unique.

Author

Commented:
Thank you so much!

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial