lianne143
asked on
Integrating Cisco Aironet 1142 Wireless-N and Cisco 4400 WLC with Windows 2008 Radius server
Hi
My predecessors have setup wireless network using the following:
Cisco Aironet 1142 Wireless-N Lightweight Access Point and
Cisco 4400 Wireless LAN Controller and
Window 2008 as a Radius server.
Please post me some documentation or tutorials as how this works /how to integrate and configure these. Also how the clients gets authenticated and gets certificate from the Radius server .
Thanks
My predecessors have setup wireless network using the following:
Cisco Aironet 1142 Wireless-N Lightweight Access Point and
Cisco 4400 Wireless LAN Controller and
Window 2008 as a Radius server.
Please post me some documentation or tutorials as how this works /how to integrate and configure these. Also how the clients gets authenticated and gets certificate from the Radius server .
Thanks
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
I looked at the certificates in the AD server through GPMC
-Computer Configuration
-Windows settings
-Security settings
-Wireless network
on the right pane -right click the properties-preffered networks
Edit - IEEE802.1X - settings - and View Certificate.
and the certificates are valid and i can see the same valid certificate on the client as well.
and they are valid till 2030 and it looks like self signed. Is there any chance for the certificate to get corrupted?
Is there a way to test/diagonise if the Cisco 4400 WLC controller is able to establish proper relationship with the Radius Server.
Thanks