I am running two Cisco 2620 routers in my home lab, and want to configure them with IP SLA.
However, the version of IOS I am running (c2600-IPBASEK9-M, ver 12.4(23)), does not seem to fully support this.
The only two commands I can use are:
IP SLA MONITOR RESPONDER
IP SLA MONITOR KEY-CHAIN
Which does not allow me to setup the testing side of the configuration.
I need to be able to do the following:
IP SLA 10
UDP-JITTER 10.1.1.1 16800 source-ip 10.2.2.2 codec g711ulaw
IP SLA SCHEDULE 10 life forever start-time now
What version of IOS do I need to be running to fully support IP SLA? (I tried loading a different version of IOS, but that took be backwards to the older RTR commands.)