Siemens High Path 3500 PBX

What is Siemens High Path 3500 PBX default ip address and username/password?
jacksch4820Asked:
Who is Participating?
 
agonza07Connect With a Mentor Commented:
Is administration enabled? Do you have the software to access it?


http://wiki.siemens-enterprise.com/wiki/HiPath_3000
Administration and Service

Manager E / C / WBM HG1500
HiPath Manager E is the Administration Software for the HiPath platforms 500/3000/5000. It is specially meant for technicians. A service friendly Webinterface is supplied for the optional Gateway HG 1500.
 
The HiPath Manager C is the customer version and is specialized for the customer requirements to adapt subscriber parameters, authorizations, call forwarding, etc.

Maybe you're asking for the web admin of the HG1500. Try 31994/31994 or HRM/HICOM

http://pdf.textfiles.com/manuals/TELECOM-S-Z/Siemens%20HiPath%20HG1500%20Service%20Manual.pdf
IP address I think is manual.

These settings are temporary and are only stored permanently on the board on entry
to the customer database. The HiPath HG 1500 default IP address (10.144.233.63)
is reserved for startup and cannot be used as a permanent IP address in the network.
0
 
jacksch4820Author Commented:
Thanks agonza07
Only software I have is please see attached file.
Basically I want to connect to the PBX and managed it but don’t know how to.
Can I also manage the PBX vi v.24 interface and if what cable do I need I tired RS232 did not work.

Please assist how I can do this.
0
 
agonza07Commented:
I think you forgot the attachment.

Most likely you will need to get with the vendor who initially installed this system for you. I'm sure the password has been changed already.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.