Solved

3Com 4500 Switch

Posted on 2013-01-07
1
478 Views
Last Modified: 2013-01-08
I have one 4500 switch that has the following in it configuration and I am not sure what it does or if it is needed.

#
radius scheme system
server-type extended
primary authentication 127.0.0.1 1645
primary accounting 127.0.0.1 1646
user-name-fromat without-domain
#
Can someone tell me what this is for and if it is needed?
0
Comment
Question by:molly22
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 5

Accepted Solution

by:
Leeeee earned 500 total points
ID: 38751397
Hello, this is the default radius configuration on the switch. It will need to be left in place as is unless you want to authenticate against an external radius server. Here is a quick brief you should check out:

http://www.manualslib.com/manual/353886/3com-8807.html?page=341

Hope that helps.
0

Featured Post

Forrester Webinar: xMatters Delivers 261% ROI

Guest speaker Dean Davison, Forrester Principal Consultant, explains how a Fortune 500 communication company using xMatters found these results: Achieved a 261% ROI, Experienced $753,280 in net present value benefits over 3 years and Reduced MTTR by 91% for tier 1 incidents.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

For many of us, the  holiday season kindles the natural urge to give back to our friends, family members and communities. While it's easy for friends to notice the impact of such deeds, understanding the contributions of businesses and enterprises i…
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…

729 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question