Solved

Printer keeps printing same doc over and over. 2008 Terminals server

Posted on 2013-01-08
5
942 Views
Last Modified: 2013-01-21
Hi.
VERRY strange problem..
Have a win 2008 R2 Terminal server.
A Win 7 Pc with and localy installed network printer.
The pc can print to printer fine.

Logging on to Terminal server, the printer gets installed (rediredted). But when printing, it prints same page until tray is empty.
To make it worse:
Installed printer localy on terminal server (as a network printer)
Printing to it loged on the terminal server as this or any user gives same problem.
Printint logged on terminal server as admin, no problem..

The user logged in on terminal server printing to another identical printer with same driver no problem...


SO: since users can print to other identilcal printers with same driver (just diffrent ip), points to faulty printer.
But, since ha prints fine to printer localy from his pc (not logged on Terminal server) via USB and network. AND admin can print loggd on terminal server, with no duplicates...


Have tried changing IP and difrent drivers (PS, PCL and simular printer types)

Printer installed by redirecting uses Easy-print driver. Localy installed on terminal server uses Hp's own driver.
0
Comment
Question by:Tore Jacobsen
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
5 Comments
 
LVL 24

Expert Comment

by:Nagendra Pratap Singh
ID: 38758193
0
 
LVL 1

Author Comment

by:Tore Jacobsen
ID: 38762263
HP Laserjet Professional P1606dn
0
 
LVL 27

Expert Comment

by:Steve
ID: 38767060
have a look in the spooler and see if there are any stuck jobs
C:\Windows\System32\spool\PRINTERS

if you need to clear out this folder you will need to stop the Spooler service first (remember to start it again afterwards...)
0
 
LVL 1

Accepted Solution

by:
Tore Jacobsen earned 0 total points
ID: 38782843
Solved!!
Gave all rights on security tab on printer to user, and it was ALL GOOD!
Thanx
0
 
LVL 1

Author Closing Comment

by:Tore Jacobsen
ID: 38800486
found solution
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you migrate a Terminal Server licenses server inside the 2008 server family, you can takte advantage of the build-in migration tool. If you like to migrate an older 2003 Server (and the installed client CALs) to a 2008 R2 server for example, you …
A safe way to clean winsxs folder from your windows server 2008 R2 editions
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This Micro Tutorial hows how you can integrate  Mac OSX to a Windows Active Directory Domain. Apple has made it easy to allow users to bind their macs to a windows domain with relative ease. The following video show how to bind OSX Mavericks to …

740 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question