Solved

Cisco Aironet 1240AG Series Access Point Configuration, cant enable 802.11A interface

Posted on 2013-01-08
3
700 Views
Last Modified: 2013-01-13
Hi Guys

I have a Cisco Aironet 1240AG AP and from the GUI I can enable the interface but it shows as Disabled with the red arrow pointing down.

FYI the 802.11G Radio Interface works fine and shows as enabled, up and running.

The AP is in Access Point mode.

Can anyone help?
0
Comment
Question by:mfg1
  • 2
3 Comments
 
LVL 20

Expert Comment

by:rauenpc
ID: 38757629
you may need to specify that a power injector is connected before the radios will power up.

http://www.cisco.com/en/US/docs/wireless/access_point/1240/installation/guide/124h_c3.html#wp1062254
0
 
LVL 4

Accepted Solution

by:
mfg1 earned 0 total points
ID: 38757953
All sorted now, I had to simply tick the box for 802.11a under the ssid manager, now its working ok.
0
 
LVL 4

Author Closing Comment

by:mfg1
ID: 38771663
Sorted myself
0

Featured Post

Highfive Gives IT Their Time Back

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Suggested Solutions

If you are thinking of adopting cloud services, or just curious as to what ‘the cloud’ can offer then the leader according to Gartner for Infrastructure as a Service (IaaS) is Amazon Web Services (AWS).  When I started using AWS I was completely new…
This subject  of securing wireless devices conjures up visions of your PC or mobile phone connecting to the Internet through some hotspot at Starbucks. But it is so much more than that. Let’s look at the facts: devices#sthash.eoFY7dic.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

747 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

8 Experts available now in Live!

Get 1:1 Help Now