Solved

Windows and Cisco VPN Autoconnect

Posted on 2013-01-13
2
428 Views
Last Modified: 2013-06-10
Trying to get cisco vpn to autoconnect at login for various network reasons. Following adding the autoinitiation lines to the vpnclient.ini file, not having much luck. Anyone gotten this to work?
0
Comment
Question by:lconitdept
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 17

Accepted Solution

by:
lruiz52 earned 500 total points
ID: 38773003
0
 

Author Comment

by:lconitdept
ID: 38778769
That seems to work to keep tunnel active at log-out but doesn't force user to connect to VPN if they have a network connection.
0

Featured Post

IoT Devices - Fast, Cheap or Secure…Pick Two

The IoT market is growing at a rapid pace and manufacturers are under pressure to quickly provide new products. Can you be sure that your devices do what they're supposed to do, while still being secure?

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Sometimes, you want your microsoft VPN to route all the traffic to the remote network. Usually your employer network. This makes it possible to access all the nodes inside this remote LAN, even if they have no "public DNS" entries. To do so, you wo…
Using Windows 2008 RRAS, I was able to successfully VPN into the network, but I was having problems restricting my test user from accessing certain things on the network.  I used Google in order to try to find out how to stop people from accessing c…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

623 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question