Solved

Data recovery - Nas device in Raid 0 - Any suggestions for fast services?

Posted on 2013-01-14
3
224 Views
Last Modified: 2013-09-04
Hi,

Is there any one in the UK who can recommend data recovery services in the UK.
We had a buffalo NAS device where one drive failed.

We have tried UFS explorer and tried to mount the drive but have not had luck so far (a sperate quetion on this exists)

Is there anything anyone can recommend or good data recovery services in UK that will help with this?

Anyone that can help much appeciated.
0
Comment
Question by:afflik1923
  • 2
3 Comments
 
LVL 36

Accepted Solution

by:
ArneLovius earned 500 total points
ID: 38778472
If you had RAID0 and a disk failed, you will not recover anything without taking the disks to a specialist recovery company who would need to recover the data from the failed drive before recreating the RAID0 array.

In the UK, in the past I have used Vogon (1992, recovered two crashed disks from a RAID5 array) , I have also heard good reports from Kroll Ontrack.

When using RAID0, it is always a question of when, not if you will lose data.
0
 

Author Comment

by:afflik1923
ID: 38835203
Will update shortly
0
 

Author Closing Comment

by:afflik1923
ID: 39466244
In the end used Kroll Ontrack. Was very expensive and to be honest, if we had more time we could have done it inhouse with software.
But we did get the data back
0

Featured Post

Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

Join & Write a Comment

First I will try to share a design of a Veeam Backup Infrastructure without Direct NFS Access backup. Note: Direct NFS Access backup transport mechanism is only available in Veeam v9 In above I try to design the Veeam Backup flow between i…
A Bare Metal Image backup allows for the restore of an entire system to a similar or dissimilar hardware. They are highly useful for migrations and disaster recovery. Bare Metal Image backups support Full and Incremental backups. Differential backup…
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…
This tutorial will walk an individual through the process of installing of Data Protection Manager on a server running Windows Server 2012 R2, including the prerequisites. Microsoft .Net 3.5 is required. To install this feature, go to Server Manager…

760 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

24 Experts available now in Live!

Get 1:1 Help Now