Want to win a PS4? Go Premium and enter to win our High-Tech Treats giveaway. Enter to Win

x
?
Solved

VLANS on SRX210

Posted on 2013-01-15
4
Medium Priority
?
444 Views
Last Modified: 2013-01-27
I have 2 networks 192.168.1.0 and 10.140.0.0 on the same switch confgured  for 2 vlans . Can these be trunked to an SRX210 interface using one physical connection ?
0
Comment
Question by:mac_20
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
4 Comments
 
LVL 17

Expert Comment

by:lruiz52
ID: 38779320
0
 
LVL 17

Expert Comment

by:TimotiSt
ID: 38792573
Example code from an interface without switching. Please note, this is a redundant interface (reth), but plain Gig interfaces work the same.

    reth0 {
        vlan-tagging;
        redundant-ether-options {
            redundancy-group 1;
        }
        unit 4001 {
            description invitel;
            vlan-id 4001;
            family inet {
                address 1.2.3.4/30;
            }
        }
        unit 4002 {
            description interconnect;
            vlan-id 4002;
            family inet {
                address 2.3.4.5/30;
            }
        }
        unit 4003 {
            description invitel_backup;
            vlan-id 4003;
            family inet {
                address 5.6.7.8/30;
            }
        }
        unit 4010 {
            vlan-id 4010;
        }
    }

Open in new window


Tamas
0
 

Accepted Solution

by:
mac_20 earned 0 total points
ID: 38806417
Thanks the switching portion on the end device wasnt set for trunking. Thanks for your help.
0
 

Author Closing Comment

by:mac_20
ID: 38823795
Quick prompt response.
0

Featured Post

Concerto Cloud for Software Providers & ISVs

Can Concerto Cloud Services help you focus on evolving your application offerings, while delivering the best cloud experience to your customers? From DevOps to revenue models and customer support, the answer is yes!

Learn how Concerto can help you.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Originally, this post was published on Monitis Blog, you can check it here . It goes without saying that technology has transformed society and the very nature of how we live, work, and communicate in ways that would’ve been incomprehensible 5 ye…
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
Suggested Courses

618 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question