Solved

upgrade anyconnect package on ASA Firewall

Posted on 2013-01-15
2
383 Views
Last Modified: 2013-07-12
I have it configured so that someone can visit an external page, login on that page, and it'll download an AnyConnect package. That version on there is old and I'd like for it to download an updated package, which I have and put on the ASA. How do I configure it so that it'll pull the new package and not the old?
0
Comment
Question by:pstiffsae
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 11

Accepted Solution

by:
itguy565 earned 500 total points
ID: 38780598
0
 

Author Comment

by:pstiffsae
ID: 38780727
Well - I'm on ASDM 6.2 and this looks to be ASDM 6.4, so there's one hurdle to cross...
0

Featured Post

Don't miss ATEN at NAB Show April 24-27!

Visit ATEN at NAB Show to learn how our "Seamlessly Entertaining" solutions deliver fast, precise video streaming without delays for the broadcasting and media environment. ATEN will showcase its 16x16 Modular Matrix Switch (VM1600) and KVM Over IP Solution (KE6900 series).

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
replacing 2811 to ISR 4331 2 41
BGP Local Preference 5 45
Bizarre IP Address / Port Blocking Windows 7 13 56
Cisco Switch slow_Faulty Link 7 13
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

740 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question