Solved

Exchange Store in SBS08 won't load on new server, how to fix?

Posted on 2013-01-15
4
399 Views
Last Modified: 2016-11-23
I have just completed a server migration from a dell T105 to a T410. Everything seems to be going pretty well except the Exchange Store cannot be started. The error log had the following entries:

Error - MSExchange ADAccess - Event ID 2114 - Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=3004). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185, "Microsoft LDAP Error Codes." Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.

Information - MSExchange ADAccess - Event ID 2080 - "Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=3004). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
 (Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site: pserver.dom01.local      CDG 1 0 0 1 0 0 0 0 0
Out-of-site:  "

I reached this point by running a restore from my ShadowCraft backup and running a hardware independent restore. All of the drivers are loaded, there are no errors in device manager. The new server has dual quad core processors and 32gb of ram. The previous server (in place currently) only has 8gb of ram w/ a single quad core processor. The restore ran without any errors (that I could see).

I have very little experience with Exchange. Can anyone shed some light on what could be causing this?
Exchange-Errors.csv
0
Comment
Question by:mic-net
  • 3
4 Comments
 
LVL 19

Expert Comment

by:R--R
ID: 38782103
How did you migrated the exchange?
0
 

Author Comment

by:mic-net
ID: 38783045
Like I listed in the original post. I did a full restore from backup from the old server to the new server.
0
 

Accepted Solution

by:
mic-net earned 0 total points
ID: 38852236
The solution was to reconfigure the NIC with the same settings as the previous server. This solved the problem.
0
 

Author Closing Comment

by:mic-net
ID: 38870826
This was solved by a post at tek-tips.com.
0

Featured Post

Why spend so long doing email signature updates?

Do you spend loads of your time carrying out email signature updates? Not very interesting are they? Don’t let signature updates get you down. Let Exclaimer Cloud - Signatures for Office 365 make managing email signatures a breeze.

Join & Write a Comment

Check out this infographic on what you need to make a good email signature that will work perfectly for your organization.
Local Continuous Replication is a cost effective and quick way of backing up Exchange server data. The following article describes the steps required to configure Local Continuous Replication. Also, the article tells you how to restore from a backup…
In this video we show how to create an Address List in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Organization >> Ad…
To show how to create a transport rule in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Mail Flow >> Rules tab.:  To cr…

708 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

14 Experts available now in Live!

Get 1:1 Help Now