[Webinar] Streamline your web hosting managementRegister Today

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 868
  • Last Modified:

need help setting up Netgear SRXN3205

I am trying to set up this Netgear SRMX3205 in a *very* simple way, but I'm having no luck. I have a static IP address for the WAN connection, its LAN IP is 192.168.0.1, it will not do DHCP. All ports to forward to 192.168.0.2. That's it. I can't seem to manage this. attached is an image of the Security > LAN WAN Rules page. Can someone tell me what I am doing wrong? I have no connection to anything on the public IP from the outside.
srxn3205-security-LANWANrules.jpg
0
jmarkfoley
Asked:
jmarkfoley
  • 3
  • 2
1 Solution
 
jmarkfoleyAuthor Commented:
Thanks for your response, but I found my answer through other expert sites. I'm a bit disappointed there were no other attempt at this question. I'll give you the point for being the sole respondant.
0
 
jcimarronCommented:
jmarkfoley--You are welcome.
But, if you are willing, it would make this thread much more valuable (since it is archived) if you tell us the fix.  
Thanks.
0
 
jmarkfoleyAuthor Commented:
sorry, I meant to. The problem was simple: I transposed a couple of digits in the gateway IP. Another forum participant persuaded me to let go of my obsession with firewall settings and double-check (more like quadruple-check) my WAN settings. Even at that I had to inspect it several times before I saw the error; we see what we expect to see!
0
 
jcimarronCommented:
jmarkfoley--Again thanks.  A lesson for all.
0

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

  • 3
  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now