Solved

Datacenter Downsizing Wiring

Posted on 2013-01-16
6
166 Views
Last Modified: 2013-01-18
At our colocation facility, my company current has two 100mb circuits for internet connectivity, each connecting to a router.  We are scaling back at this colocation facility and will be dropping one of the circuits, but combining the allocated IP's to the single remaining circuit.   Can I connect the remaining circuit with the combined IP's and the two routers to a switch? or do I need to reconfigure one of the routers to handles all the IP's?  Diagram for clarity attached.  Thanks.
CircuitRewire.pdf
0
Comment
Question by:gtkdw
  • 3
  • 3
6 Comments
 
LVL 5

Expert Comment

by:Leeeee
ID: 38783419
Are the two circuits through two different ISPs? Are you advertisement via BGP currently?
0
 

Author Comment

by:gtkdw
ID: 38783428
Circuits are from the same ISP.  Not sure regarding BGP.
0
 
LVL 5

Expert Comment

by:Leeeee
ID: 38783462
In theory, you should be able to do this. With the layer 2 segment in between your edge routers and the sp edge, make sure your ISP is on board as you may need to coordinate the IP configuration.

Without knowing how your current IP space has been allocated to you, I have seen this set-up at several customers I have worked at. Are you consolidating the IP space to one /24? How was it broken up in the current environment?
0
PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

 

Author Comment

by:gtkdw
ID: 38783489
We currently have multiple /24's on each circuit.  All together it will be four /24's and one /23 on the remaining circuit.
0
 
LVL 5

Accepted Solution

by:
Leeeee earned 250 total points
ID: 38783549
It may be beneficial to research how your ISP is handling routing regarding those subnets in the current environment, and whether they are advertising those networks for you or if BGP is running on your edge routers. Do you have access to them or are they managed by your ISP?
0
 

Author Comment

by:gtkdw
ID: 38783565
I have access to them.
0

Featured Post

Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
How often can a passive RFID be polled? 10 112
IPv6 and IPv4 Subnetting scheme 4 46
Best alternatives to Solarwinds 14 64
Wifi addin for wireshark? 5 30
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question