Solved

iSeries 5250 connection - Cisco VPN Client - Windows 8 Combo

Posted on 2013-01-16
7
2,245 Views
1 Endorsement
Last Modified: 2013-08-02
Hi.
I have a Windows 8 Laptop. Not Pro, Not Enterprise. Just the "8".
I have Cisco VPN version 5.0.07.0440.
I have iSeries Access 5250 software Version 7.1 with most current Service Pack.

AS400 5250 connects great locally, connected via our internal network.
I had to make a registry tweak, but I got VPN to connect to our ASA-5505 VPN Firewall from outside.
When I hook up VPN, then try to connect 5250 to our AS400 via outside connection, I get the Error "CWBCO1048- A firewall blockage or time-out occured trying to connect to the system i"

My windows 7 and Windows XP connections the same way, same software all work fine. Just windows 8.
I have shut off all Firewalls in Windows 8 (there are 3, Domain, Public, and Private), and I have shut down all anti-virus software (even though it works with it running on other op systesm).

Has anyone else run into this and have found a Fix or work around?
Thanks again, in advance.
Rj
1
Comment
Question by:RjCoats
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
7 Comments
 
LVL 54

Expert Comment

by:McKnife
ID: 38784887
I would strongly advise you to contact the manufacturer or read his FAQ about compatibility to win8. If the manufacturer has a forum, ask there, much likelier to find other affected people over there.
0
 

Author Comment

by:RjCoats
ID: 38801456
The Manufacturer is Microsoft Windows 8. Im looking at their forum now some more.

Im finding all over the web, this is a problem. Its not an IBM or Cisco Problem, because simple Telnet, and Mocha TN5250 doesnt work either.
Its not hardware, its op system causing me to not be able to use my TN5250 software over the VPN Connection.

Thanks. Still looking
Rj
0
 
LVL 54

Expert Comment

by:McKnife
ID: 38803325
An incompatibility always involves at least 2 parties. So check with IBM and Cisco supports/FAQs as well.
0
 

Author Comment

by:RjCoats
ID: 38805475
Thanks McKnife.
The TN5250 software connects perfectly in house (iSeries Access). No problem what so ever.
The Cisco VPN connects Remotely good, and I even see it conneting on my VPN firewall (useing a hot spot for the laptop).
I had to make a registry tweak I found to get it to do that so yes, it could also involve the Cisco Client still.

Since the AS400 (TN5250) works in house, the 2 parties would be Cisco and Windows 8.
Mocha TN5250 IS compatable with windows 8 it claims, and also works great in house, but not on the road via Cisco Client.

Thanks for the post :)
Rj
0
 

Accepted Solution

by:
RjCoats earned 0 total points
ID: 38806650
Ok, after finding a forum that had something about Uninstalling internet security 3rd party software, rather than "disableing" it, I uninstalled Kapersky Internet security with Windows 8 pro, and then connected to my VPN, and my 5250 software and pings and all started working. This is with windows firewall at its default settings.
I will now install AVG AV only (not Internet security) and see if it works.
But basically, if your having this problem, uninstall your 3rd party security, dont just "disable".
rj
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
ASA 5505 latency problem 8 71
Port# 500 and 4500 not open by ISP 10 88
SSL-VPN Solution 8 36
VPN - Site to Site  not decapsulating (ASA-Sophos XG85) 1 32
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

738 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question