Solved

Add a switch to an existing fabric

Posted on 2013-01-17
1
1,237 Views
Last Modified: 2013-01-20
We have 2 brocade san switch already configured.

I need to add a 3rd brocade san switch to the existing fabric, but I don't have the procedure.

I also, want to know the default ip adress and login credential of a brocade san switch?
0
Comment
Question by:cismoney
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 56

Accepted Solution

by:
andyalder earned 500 total points
ID: 38787575
Change the domain ID so it is different to the current two and connect it, with three switches a ring topology makes most sense. Are you using ISL trunking between the other two switches? ISL traffic can be reduced by having storage and servers that use it on the same switch but sometimes that's not possible.

default IP address is 10.77.77.77 username = admin and password = password.
0

Featured Post

[Webinar] Learn How Hackers Steal Your Credentials

Do You Know How Hackers Steal Your Credentials? Join us and Skyport Systems to learn how hackers steal your credentials and why Active Directory must be secure to stop them. Thursday, July 13, 2017 10:00 A.M. PDT

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Each year, investment in cloud platforms grows more than 20% (https://www.immun.io/hubfs/Immunio_2016/Content/Marketing/Cloud-Security-Report-2016.pdf?submissionGuid=a8d80a00-6fee-4b85-81db-a4e28f681762) as an increasing number of companies begin to…
This article shows how to use a free utility called 'Parkdale' to easily test the performance and benchmark any Hard Drive(s) installed in your computer. We also look at RAM Disks and their speed comparisons.
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

627 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question