Solved

synology ds2115 not coming back up after reboot

Posted on 2013-01-17
4
718 Views
Last Modified: 2013-01-18
We have the synology ds2115 and it is not coming back up after we reboot our  xp
we have it installed on
any help?


 we have retrospect 8.1 as out backup software not that it matter
0
Comment
Question by:john M
  • 2
  • 2
4 Comments
 
LVL 88

Accepted Solution

by:
rindi earned 500 total points
ID: 38792203
Have you tried power-cycling the NAS? What does the Synology utility show when you run it? Have you checked your LAN connection? Did you set the NAS to use static IP or does it get it's IP from a DHCP server?
0
 
LVL 3

Author Comment

by:john M
ID: 38792969
its a static ip address the device assigns
0
 
LVL 88

Expert Comment

by:rindi
ID: 38792978
What about the other Questions?
0
 
LVL 3

Author Comment

by:john M
ID: 38793374
was checking them out. We found power setting on the card and within there software
I will talk to our people about your other  questions. I am just a programmer.

Thanks
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article offers some helpful and general tips for safe browsing and online shopping. It offers simple and manageable procedures that help to ensure the safety of one's personal information and the security of any devices.
Workplace bullying has increased with the use of email and social media. Retain evidence of this with email archiving to protect your employees.
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question