Solved

Register LAP 1600 Aironet to a WLC 2504

Posted on 2013-01-18
2
1,262 Views
Last Modified: 2013-04-15
I am attempting to register my LAP 1600 with my WLC 2504. I am having an issue. For one I have configured as best I can. The way the WLC and LAP is setup currently is as follows;

LAP 1600 <----> L3 Cisco Switch vlan 10 <----> WLC2504. There is a DHCP on that vlan and its just straight layer 2 from the LAP and WLC.

The firmware version on the WLC is 7.0.220.0

LAP I am not for sure of.
0
Comment
Question by:chris_npion
2 Comments
 

Author Comment

by:chris_npion
ID: 38794145
I have attached debug logs
debug-logs.txt
0
 
LVL 45

Accepted Solution

by:
Craig Beck earned 500 total points
ID: 38794215
You need to upgrade the code on the WLC to at least V7.3
The version you have (7.0.220.0) doesn't know about the 1600 AP so it won't join, ever!
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

929 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now