Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

Unable to access servers connected on point-to-point VPN when connected to office by Cisco AnyConnect VPN

Posted on 2013-01-18
1
Medium Priority
?
183 Views
Last Modified: 2013-09-09
We use a Cisco ASA as the firewall in our two offices.  A point-to-point VPN exists between the two offices.  When a user makes a VPN connection from home to Office A, they are unable to access resources that are in Office B via the P2P VPN.  How can I fix this?
0
Comment
Question by:gtkdw
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 20

Accepted Solution

by:
rauenpc earned 2000 total points
ID: 38795698
The split tunnel acl needs to include both sites, and the tunnel acl needs to include the client VPN subnets as well. You will also need to configure "same-security permit intra-interface"
0

Featured Post

On Demand Webinar: Networking for the Cloud Era

Ready to improve network connectivity? Watch this webinar to learn how SD-WANs and a one-click instant connect tool can boost provisions, deployment, and management of your cloud connection.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

There are times where you would like to have access to information that is only available from a different network. This network could be down the hall, or across country. If each of the network sites have access to the internet, you can create a ne…
This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

722 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question