Solved

Cisco 5505 switching to Comcast static IPs

Posted on 2013-01-18
4
374 Views
Last Modified: 2013-01-29
Hello out there -

I am a Cisco newbie and have been tasked with switching static IPs from an unknown ISP to Comcast issued static IPs on a Cisco 5505.

I have been provided 5 static IP by Comcast. The client also needs the VPN to continue to function properly.

I am pretty sure that I will only need to switch the old static IPs with the new static IP addresses, however, I have never done such a thing on any Cisco product or VPN.

What do I need to look out for and, if possible, could you provide me with a quick walkthrough of the process?

Many thanks!
0
Comment
Question by:jstelamon
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 17

Accepted Solution

by:
lruiz52 earned 500 total points
ID: 38794833
0
 

Author Comment

by:jstelamon
ID: 38807294
Well, that was very helpful.  I was able to get the gateway and the staic IPs updated and the network is functioning and able to communicate with the internet. Tank you for your help.

However, now the RDP is not working. I pointed the static IP to the RDP address and we are able to access the RDP login screen, but it will not accept the password for the domain.

Any ideas on how to remedy this?

Let me know. Thanks
0
 
LVL 17

Expert Comment

by:lruiz52
ID: 38808588
Are you using this format for username;

Domain\username
0
 

Author Comment

by:jstelamon
ID: 38830900
yeah - turned out to be user error - I am pretty sure the user was fat fingering his password - thanks
0

Featured Post

Save the day with this special offer from ATEN!

Save 30% on the CV211 using promo code EXPERTS30 now through April 30th. The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Using Windows 2008 RRAS, I was able to successfully VPN into the network, but I was having problems restricting my test user from accessing certain things on the network.  I used Google in order to try to find out how to stop people from accessing c…
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

759 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question