Solved

# Fromula Results 2

Posted on 2013-01-21
Medium Priority
267 Views
Year({JAM_DSH_OP_Open__Summary.OrderRel.NeedByDate}) = Year(currentdate) and
Month({JAM_DSH_OP_Open__Summary.OrderRel.NeedByDate}) = Month(currentdate) and
Day({JAM_DSH_OP_Open__Summary.OrderRel.NeedByDate}) <= Day(currentdate)

I have a formula above and would like to know what the results would return.  The data being pulled has multiple years before and after the current month.

What I am trying to do is get the formula to select anything less than or equal to the current day and within the same month withing the same year.  For example.  If today is 1/21/2013  I am wanting to pull everything from 1/21/2013 back to 1/12013

Just wanting to make sure.

Previously I asked a similar question and found I had the wrong formula.

Just wanting to make sure this will work.

0
Question by:Trygve Thayer
[X]
###### Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

• Help others & share knowledge
• Earn cash & points
• 2
• 2

LVL 101

Expert Comment

ID: 38803112
Easy way to get this

{JAM_DSH_OP_Open__Summary.OrderRel.NeedByDate}  IN MonthToDate

mlmcc
0

LVL 3

Author Comment

ID: 38803891
Wow there are many ways to get there!  Thanks for taking the time.  If I am going the opposite way for the same year and the current month but the day is greater than today but still the same month is there also a better way or should I use the below.

Year({JAM_DSH_OP_Open__Summary.OrderRel.NeedByDate}) = Year(currentdate) and
Month({JAM_DSH_OP_Open__Summary.OrderRel.NeedByDate}) = Month(currentdate) and
Day({JAM_DSH_OP_Open__Summary.OrderRel.NeedByDate}) > Day(currentdate)
0

LVL 101

Accepted Solution

mlmcc earned 2000 total points
ID: 38803916
Perhaps

{JAM_DSH_OP_Open__Summary.OrderRel.NeedByDate} > CurrentDate AND
JAM_DSH_OP_Open__Summary.OrderRel.NeedByDate < DateSerial(Year(CurrentDate), Month(CurrentDate) + 1, 1)

mlmcc
0

LVL 3

Author Comment

ID: 38804062
Thanks so much.
0

## Featured Post

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Crystal Reports: 5 Tests for Top Performance It is complete, your masterpiece report.  Not only does it meet your customer’s expectations, it blows them out the water, all they want is beautifully summarised and displayed in a myriad of ways. …
Hot fix for .Net Crystal Reports 10.2.3600.0 to fix problems with sub reports running on 64 bit operating systems ISSUE: Reports which contain subreports fail with error "Missing Parameter Value" DEPLOYMENT SERVER OS: Windows 2008 with 64 bi…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …
###### Suggested Courses
Course of the Month14 days, 16 hours left to enroll