Solved

SCCM 2012 Setup

Posted on 2013-01-23
5
543 Views
Last Modified: 2013-01-23
Hi All,

We are gonna setup an SCCM 2012 Env. but to do this we need to order new Servers so i want to make sure that i am making the right discussion here so we don't spend money on servers we don't need in attachment there is an overview of what i think should be our setup.

one remark none of our office have more then 50 PC's the only one is the UK one that has +/- 100 and we have a mixed environment mac & win

Any suggestions, tips, remarks, ... are welcome.
Do i need to add servers with different items, ...

thx for your help
SCCM-Config.pdf
0
Comment
Question by:cornilm
  • 3
  • 2
5 Comments
 
LVL 31

Expert Comment

by:merowinger
ID: 38809557
SCCM Server important are fast disks and a fast network connection.
Also keep in mind that a Primary Site, or Secondary Site server with Distribution Points stores are Package or the source files two or three times.
With Windows Server 2008 R2, SQL, MDT, WAIK, SCUP installed i've in use 80GB of my C:\ Partition. SCCM is installed on D:  - So better take bigger disks.
In your case we're talking about less than 500 Clients, right. I think the hardware should match those requirements. Also don't forget to calculate with a Client and User growth.
0
 

Author Comment

by:cornilm
ID: 38809582
Is it possible to assign a client to a secondary server?

Also what are the roles that can be added to the Secondary server?
DP
Management?
...
0
 
LVL 31

Accepted Solution

by:
merowinger earned 500 total points
ID: 38809640
A Client can only be assinged to a Primary Site. So if you would configure the Secondary Site Site code in the Client Option it would mention that this is not possible. Clients can use Secondary Sites Management Point when the Client is within the configured IP Boundaries of an Secondary Site.
I use Management Point, Distribution Point, Software Update Point and PXE Service Point on my Secondary Site Server. Also you could install a State Migration Point
0
 

Author Comment

by:cornilm
ID: 38809820
Thx,

That was the thing that was unclear to me.

so the clients are assigned to the Primary server and take there data from the secondary server.
0
 
LVL 31

Expert Comment

by:merowinger
ID: 38809827
Yes exactly.

Thanks.
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In this article we have discussed the manual scenarios to recover data from Windows 10 through some backup and recovery tools which are offered by it.
The recent Microsoft changes on update philosophy for Windows pre-10 and their impact on existing WSUS implementations.
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…
This Micro Tutorial hows how you can integrate  Mac OSX to a Windows Active Directory Domain. Apple has made it easy to allow users to bind their macs to a windows domain with relative ease. The following video show how to bind OSX Mavericks to …

910 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now