Solved

ASA TRAFFIC ENGINEERING

Posted on 2013-01-23
1
359 Views
Last Modified: 2013-01-23
I was curious if the Cisco ASA was able to redirect traffic out a specific interface based on local or radius authentication.  Effectively can you Traffic Engineer based on level of Authentication.  

My ultimate goal is to direct remote users into different ports on a Core Switch.  The interface on the Core Switch will then be mapped to a VRF.  The secret sauce is being able to direct traffic out different interfaces on the ASA based on Authentication.

If not the ASA, do you know of any other boxes that might do the job?
0
Comment
Question by:sectel
1 Comment
 
LVL 10

Accepted Solution

by:
ddiazp earned 500 total points
ID: 38812551
Should be doable by implementing route-maps and 802.1x on the core switch.

How are users authenticating and to what?
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco Supervisor upgrade to 2T 3 49
Do you need to have Windows Firewall on if you have a hardware firewall 9 74
network error 8 35
Website Issue 10 66
Every server (virtual or physical) needs a console: and the console can be provided through hardware directly connected, software for remote connections, local connections, through a KVM, etc. This document explains the different types of consol…
This article offers some helpful and general tips for safe browsing and online shopping. It offers simple and manageable procedures that help to ensure the safety of one's personal information and the security of any devices.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

920 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now