asked on

HP LaserJet 4000T SBS 2011 X86 Driver

We recently upgraded our server to SBS 2011. My last printer is an HP LaserJet 4000T. It is connected to the network through a TrendNet TE100-P1P parallel print server. I am attempting to connect it to my server and make both the x64 and x86 drivers available. I have been able to get the x64 drivers working with no problem. I have not been able to add the x86 driver for my Windows XP client machines. Where can I find the .inf file for the printer for 32-bit system?

t-work

This is where you get the Driver:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=de&cc=de&prodNameId=14954&prodTypeId=18972&prodSeriesId=25474&swLang=18&taskId=135&swEnvOID=228

Use a 32Bit (x86) Windows 7 machine to install the 32Bit driver to the server remotely.

Or have a look at this:
http://support.microsoft.com/kb/979385/en-us

hdhondt

The XP x86 driver is here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=14952&prodTypeId=18972&prodSeriesId=25474&swLang=8&taskId=135&swEnvOID=228

When you run it it will create a folder with all the driver files, including the INF.

Jason Hart

ASKER

I have attempted to use the inf from the link posted. I get the error "The specified location does not contain the driver HP LaserJet 4000 Series PCL6 for the requested processor architecture." What would my next step be?

ASKER CERTIFIED SOLUTION

Jason Hart

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

Jason Hart

ASKER

Quickest solution.