Solved

T1 and T3 configuration difference

Posted on 2013-01-26
2
230 Views
Last Modified: 2013-01-26
Experts
I know how to configure T1. But i am a little confused about T3, the T3 has the same configuration as T1 ?  What is is difference configuration between both t1 and t3?
Thanks
0
Comment
Question by:davidy2001
2 Comments
 
LVL 17

Accepted Solution

by:
TimotiSt earned 500 total points
ID: 38823283
They are kind-of similar, T3 has different framing formats and such. Your ISP should tell you how to set up your side, for syntax, check out the Cisco guide:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ft_te3nm.html

Tamas
0
 

Author Comment

by:davidy2001
ID: 38823287
Good, Thank you so much.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

I eventually solved a perplexing problem setting up telnet for a new switch.  I installed a new Cisco WS-03560X-24P switch connected to an existing Cisco 4506 running a WS-X4013-10GE Sup II-Plus. After configuring vlans and trunking,  I could no…
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question