Solved

tally printer

Posted on 2013-01-28
2
289 Views
Last Modified: 2013-06-03
i have tally printer model t6212 dot matrix i connect on it by network and my pc have windows 7 when i print on it it give me more space between lines and numbers is english i want to decrease the space between these lines and number appear as arabic
0
Comment
Question by:alaamkld101985
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 

Author Comment

by:alaamkld101985
ID: 38826034
please give me any data sheet for solve this peoblem if needed
0
 
LVL 30

Accepted Solution

by:
Duncan Meyers earned 500 total points
ID: 38829255
You can find the manuals here: http://www.tallygenicom.com/products/productmanuals.aspx?id=5979.
First, print off the current configuration settings: To print the current printer configurations, follow these instructions.

Press the Menu key:
Press any Arrow key until display shows Config Menu.
Press the Enter key.
Press any Arrow key until display shows Printer.
Press the Enter key.
Press any Arrow key until display shows Report.
Press the Enter key.
Press any Arrow key until display shows All Configs.
Press the Enter key and the configurations will be printed.
Download the operations manual and go to page 3-2. This section shows you how to set printer defaults. The default  is six Lines Per Inch. You also need to check CR (Carriage Return) after LF  (Line Feed) and make sure that Windows is not sending a LF after a CR.

It doesn't look like the printer supports Arabic character sets natively - you could try printing them as graphics (drivers are here: http://www.tallygenicom.com/products/productdrivers.aspx?id=5979). The manual indicates that the printer supports IBM Proprinter, MTPL, Genicom4800, Genicom5000 and Epson FX-1180 emulations - all of which can print graphics. I'd recommend trying the Epson FX-1180 emulation.

FAQs are here: http://www.tallygenicom.com/faqs/default.aspx?id=6558&terms=t6212
0

Featured Post

Transaction Monitoring Vs. Real User Monitoring

Synthetic Transaction Monitoring Vs. Real User Monitoring: When To Use Each Approach? In this article, we will discuss two major monitoring approaches: Synthetic Transaction and Real User Monitoring.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Patch Management is administrated by page 129 of  the following document:     http://support.dell.com/support/edocs/software/smdmc/11/en/ug/ug.pdf However, there are issues with Patch Management with FTP (for instance, a slow Internet connectio…
Every server (virtual or physical) needs a console: and the console can be provided through hardware directly connected, software for remote connections, local connections, through a KVM, etc. This document explains the different types of consol…
There are cases when e.g. an IT administrator wants to have full access and view into selected mailboxes on Exchange server, directly from his own email account in Outlook or Outlook Web Access. This proves useful when for example administrator want…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

705 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question