Sonicwall VPN VOIP

I have two locations.

Location A has all the servers, one acting as the DHCP.  We have VOIP phones at location A along with HP ProCurve Switches.  I setup the phones on their own network and the data on another.  Both networks get their IP addresses from the DHCP server.  We have the Sonicwall NAS2400 and all is well here.  Data 192.168.5.x and VOIP 192.168.11.x, GW 192.168.5.254.  WAN 72.xxx.xxx.xxx

Location B is a new location. I am installing the Sonicwall TZ100.  The LAN will be 192.168.6.x with the GW 192.168.6.254 and a WAN of 74.xxx.xxx.xxx.  No servers, one HP Procurve switch.  Point to Point VPN.

The computers at location B are fine.  But when I try to program the phones at this location, they can't see the main phone system at location A.  Also, I can't ping the VOIP LAN at location A.

Suggestions?  TIA
tsgroup1semi-retired IT EngineerAsked:
Who is Participating?

Improve company productivity with a Business Account.Sign Up

x
 
ryan80Connect With a Mentor Commented:
Did you setup the rules for what is available over the P2P connection correctly? You have to define what subnets are available over the VPN.
0
 
tsgroup1semi-retired IT EngineerAuthor Commented:
I'll be on site Wednesday and I will do that and report back to ya.
TIA
0
 
tsgroup1semi-retired IT EngineerAuthor Commented:
Actually, it turned out to be more complicated than that.  I had to create a group address object on both Sonicwall devices.  One had the routing information.  That fixed my problem.  So you did head me down the right path.  Thank you.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.