Solved

avaya phone system wiring

Posted on 2013-01-28
9
780 Views
Last Modified: 2013-01-29
hello ,

i want to have an understanding on the wiring of he avaya a308.. the extentions have cat 5 cable going to a patch panel.. now question is on the pacth panel side do i just connect the pair of wires and run a pair all the way to the wall jack for a line..is that correct how it works .. or what is the setup from the patch panel to wall jack..
0
Comment
Question by:jafars62
  • 6
  • 3
9 Comments
 

Author Comment

by:jafars62
ID: 38829119
would like to know if i can run one pair (two wires) from patch panel to phone jack..
thanks
0
 
LVL 17

Expert Comment

by:JRSCGI
ID: 38829559
It depends on the phone model used, but most of the older Avaya Partner phones were four wire and therefore took two pairs.  The voice transmit and receive wires are separate from the signalling transmit and receive wires.
0
 

Author Comment

by:jafars62
ID: 38829781
model is Avaya 103g15/g16  a308
0
 
LVL 17

Expert Comment

by:JRSCGI
ID: 38831150
As confirmed in attached, you need one pair for analog devices and two pairs for the telephones.  The first pair wires to the center pins of the jack, and the second pair wires to the second pair (the two pins on either side of the center pin of a modular plug).
Partner-Installation-And-Use.pdf
0
How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

 

Author Comment

by:jafars62
ID: 38832062
So in other words for digital i need two pairs on the jack side
0
 

Author Comment

by:jafars62
ID: 38832086
maybe im not clear from the patch panel to the wall jack can i run one pair only to the jack so the phone will work .
0
 

Author Comment

by:jafars62
ID: 38832090
fyi thanks for that attachment it help
0
 
LVL 17

Accepted Solution

by:
JRSCGI earned 500 total points
ID: 38832198
two pairs required from the patch panel to the jack for a digital phone.
0
 

Author Closing Comment

by:jafars62
ID: 38832230
thanks. on the nortel phone systems they had one pair from patch panel to the phones thats why i figured it would be one pair...
0

Featured Post

How to run any project with ease

Manage projects of all sizes how you want. Great for personal to-do lists, project milestones, team priorities and launch plans.
- Combine task lists, docs, spreadsheets, and chat in one
- View and edit from mobile/offline
- Cut down on emails

Join & Write a Comment

Short answer to this question: there is no effective WiFi manager in iOS devices as seen in Windows WiFi or Macbook OSx WiFi management, but this article will try and provide some amicable solutions to better suite your needs.
Skype is a P2P (Peer to Peer) instant messaging and VOIP (Voice over IP) service – as well as a whole lot more.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Sending a Secure fax is easy with eFax Corporate (http://www.enterprise.efax.com). First, Just open a new email message.  In the To field, type your recipient's fax number @efaxsend.com. You can even send a secure international fax — just include t…

747 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now