Solved

#550 5.1.1 RESOLVER.ADR.ExRecipNotFound; not found ##

Posted on 2013-01-28
5
2,637 Views
Last Modified: 2013-02-18
Hi,

Just did a migration from Server 2003 running exchange 2003 to SBS 2011.

I did things pretty manual. For most of the mailboxes, I just did an exmerge and then uploaded the PST files via PST capture.

I understand that users may/will receive and error when replying to an email from the 'old' server unless they enter the x500 address. I've added the x500 address to a particular account but I figure it might be wrong.

A user tried to send a new email to someone else in the same office and it bounched back straight away with the following:

Delivery has failed to these recipients or groups:

firstname lastname<mailto:IMCEAEX-_O%3Dbusinessorganisation_OU%3DFIRST%2B20ADMINISTRATIVE%2B20GROUP_CN%3DRECIPIENTS_CN%3Dorigin@domain.local> 
The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdesk.







Diagnostic information for administrators:

Generating server: BON-VSBS-01.domain.local

IMCEAEX-_O=businessorganisation_OU=FIRST+20ADMINISTRATIVE+20GROUP_CN=RECIPIENTS_CN=origin@domain.local
#550 5.1.1 RESOLVER.ADR.ExRecipNotFound; not found ##

Original message headers:

Received: from BON-VSBS-01.domain.local ([fe80::3cef:11cb:bf8c:967]) by
 BON-VSBS-01.domain.local ([fe80::3cef:11cb:bf8c:967%10]) with mapi id
 14.01.0438.000; Fri, 25 Jan 2013 15:30:10 +1100
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: Firstname Lastname <origin@domain.com.au>
To: Firstname Lastname <destination@domain.com.au>
Subject: test
Thread-Topic: test
Thread-Index: Ac36tKf+LjBTTiVRQT2D1wEb1njIJg==
Date: Fri, 25 Jan 2013 15:30:09 +1100
Message-ID: <491C3C5820C7284E9A785E93B43C430902CF9745@BON-VSBS-01.domain.local>
Accept-Language: en-AU, en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <491C3C5820C7284E9A785E93B43C430902CF9745@BON-VSBS-01.domain.local>
MIME-Version: 1.0
X-Originating-IP: [10.1.1.119]

Open in new window


any help would be great thanks
0
Comment
Question by:Talds_Alouds
  • 3
  • 2
5 Comments
 
LVL 18

Assisted Solution

by:suriyaehnop
suriyaehnop earned 500 total points
ID: 38829869
0
 
LVL 18

Assisted Solution

by:suriyaehnop
suriyaehnop earned 500 total points
ID: 38829878
0
 

Author Comment

by:Talds_Alouds
ID: 38837653
Thank you very much. That was great.

One other question though.
I started from scratch with the migration and didn't do it via automated methods. As stated, I exported mailboxes with eXmerge.

Did this LegacyExchangeDN issue only occur because I was migrating from exchange 2003? Or,  will my next migration for this client, say moving from exchange 2010 to exchange 2013 have the same problems? Thanks
0
 

Accepted Solution

by:
Talds_Alouds earned 0 total points
ID: 38888070
Also note:

Everyone said to add in the X500 address and at the end of the address where recipient=xxxx,
everyone said to look at the email and use the recipient alias in there. In our case, our emails translated to user@domain.local. We still had the issue when sending emails. What we actually had to do was change from recipient=user@domain.local to recipient=user (or whatever their username was).
0
 

Author Closing Comment

by:Talds_Alouds
ID: 38901087
Solution wasn't 100% complete and links didn't provide whole answer.
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Find out what Office 365 Transport Rules are, how they work and their limitations managing Office 365 signatures.
How to resolve IMCEAEX NDRs in Exchange or Exchange Online related to invalid X500 addresses.
Many of my clients call in with monstrous Gmail overloading issues with Outlook. A quick tip is to turn off the All Mail and Important folders from synching. Here is a quick video I made to show you how to turn off these and other folders in Gmail s…
This video demonstrates how to sync Microsoft Exchange Public Folders with smartphones using CodeTwo Exchange Sync and Exchange ActiveSync. To learn more about CodeTwo Exchange Sync and download the free trial, go to: http://www.codetwo.com/excha…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question