Solved

Re-flashing the firmware of ADSL modem Auslinx AL-2007

Posted on 2013-01-30
6
520 Views
Last Modified: 2013-02-13
I have corrupted firmware of my modem. I have read that it's possible to re-flash the firmware and I found a clone of my modem Billion Bipac 711CE. Here is a link to download this re-flashing utility http://au.billion.com/downloads/711CE_reflash_utility.zip . What do I need now is putting my PC in DOS. I tried to use both Windows 98SE and Windows XP floppy boot disks created under those mentioned above operating systems but I couldn't reach the C:\FLASH to which I have copied the content of folder DOS Flash Utility. I really faced the problem where to find clear DOS with USB drivers and perhaps LAN support too, because although modem has to be flashed via USB, the manufacturer advises to plug the network cable as well. Please help me to find that DOS as well as instructions on how to install it on CD or HDD.
0
Comment
Question by:dmitrij75
  • 3
  • 2
6 Comments
 
LVL 14

Expert Comment

by:ThomasMcA2
Comment Utility
I thought the XP install program had a "recovery console" that opened a DOS prompt, which should let you do what you are trying to do.

The floppy versions don't contain all of the features of the CD version because of disk space limitations. So try downloading a CD version of XP, burn it to a CD, boot from the CD, then try again.
0
 
LVL 14

Expert Comment

by:Don Thomson
Comment Utility
Why Would you not just run CMD  and go to the Dos Command Prompt for XP or Win7
0
 
LVL 14

Expert Comment

by:ThomasMcA2
Comment Utility
@DTHConsulting: I think he's saying he did that, but then the C drive is not seen as an available drive.
0
Highfive Gives IT Their Time Back

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

 
LVL 1

Author Comment

by:dmitrij75
Comment Utility
Above methods are not work. Recovery console can not run .bat files and re-flashing utility demands a clear DOS. So the question is open.
0
 
LVL 14

Accepted Solution

by:
ThomasMcA2 earned 500 total points
Comment Utility
Try booting from an Ultimate Boot CD, and run your .bat file from there.
0
 
LVL 1

Author Comment

by:dmitrij75
Comment Utility
Thanks Thomas, reflashed successfully!
0

Featured Post

Highfive Gives IT Their Time Back

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Suggested Solutions

Using dates in 'DOS' batch files has always been tricky as it has no built in ways of extracting date information.  There are many tricks using string manipulation to pull out parts of the %date% variable or output of the date /t command but these r…
One of my most closely kept secrets is revealed in this discussion How to output text on the same line This question was recently posted in EE by Simon336697 (http://www.experts-exchange.com/Programming/Languages/Scripting/Shell/Batch/Q_2459…
In this seventh video of the Xpdf series, we discuss and demonstrate the PDFfonts utility, which lists all the fonts used in a PDF file. It does this via a command line interface, making it suitable for use in programs, scripts, batch files — any pl…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now