Solved

Gateway server

Posted on 2013-01-30
5
323 Views
Last Modified: 2013-02-03
One of my clients called and they have issue with Sending\Receiving emails, i have checked and all the settings are the same and no changes done on the gateway server in over a couple of weeks
0
Comment
Question by:vicky19
  • 3
  • 2
5 Comments
 
LVL 20

Accepted Solution

by:
agonza07 earned 200 total points
ID: 38836552
What about the firewall any changes there?

Try to use telnet to test from the email server out.

http://support.microsoft.com/kb/153119
0
 
LVL 20

Expert Comment

by:agonza07
ID: 38836562
here's another good site to test from the outside.

http://www.intodns.com/

www.dnsstuff.com
0
 
LVL 4

Author Comment

by:vicky19
ID: 38841043
We are bypassing traffic but still cant get the Firewall to accept messages from Interanl <-> External
0
 
LVL 20

Expert Comment

by:agonza07
ID: 38848010
Please post sanitized firewall config. Include IP address for your server.
0
 
LVL 4

Author Closing Comment

by:vicky19
ID: 38848392
one of the admins was troubleshooting and had changed some port config out there we got that fixed so thanks
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

825 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question