Solved

Registering CIPC Against CUCM Server Behind DNAT

Posted on 2013-01-30
4
882 Views
Last Modified: 2013-02-02
We've a partner running approx. 20 CIPC (8.6.2.0) devices within their network that need to register with our CUCM cluster (6.1.2); unfortunately their network uses the same address space as our servers.

We're able to get CIPC to talk to our TFTP services by configuring CIPC with the DNAT address, but the CTL downloaded contains the internal IP of our CUCM boxes. Any idea how we can configure CUCM to provide different IPs based on device IP, device pool or some other identifier.

Thanks in advance,
Jason
0
Comment
Question by:jmorourke80
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 20

Accepted Solution

by:
agonza07 earned 500 total points
ID: 38838533
Host a local TFTP server and run modified CTL and SEP files off of it.

You'll have to manually modify the files, but if its just 20 it shouldnt be that bad.
0
 
LVL 3

Author Comment

by:jmorourke80
ID: 38841128
Thanks agonza. I'd thought of that previously, and set up a TFTP server to test it out but CIPC was always trying to connect via TCP rather than UDP at first, and when it finally switched over to UDP all I was seeing on my packet capture was malformed packets. At this point I gave up, thinking Cisco must've been doing something fancy for their "TFTP" and started looking for other solutions.

Did I give up too soon? Is there someway to get these cnf.xml etc. to download successfully from a standard TFTP server?
0
 
LVL 3

Author Comment

by:jmorourke80
ID: 38841242
Okay so after a closer look at the packet captures it looks like CIPC is using HTTP to fetch files from the TFTP server. Who knew, eh?

I'm back on track to create the separate "TFTP" server (using IIS).
0
 
LVL 20

Expert Comment

by:agonza07
ID: 38841937
I like Klever Pumpkin.

Point your CIPC to it and it'll tell you the exact files it's requesting. The. Using the same program request them from your CCM. modify them and post them.
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The Zaptel people (www.zaptel.com) got kind of annoyed with the fact that they were getting bombarded with searches for the zaptel driver system for Asterisk (not to mention they own the trademark on zaptel). So, they kindly requested that Digium ch…
So you think no one can listen in on your VOIP conversations, eh? Well... if you haven't setup Secure Real Time Transport (SRTP), your voice communications can be hacked into by just about anyone! First, let's talk about the intended audience for…
Internet Business Fax to Email Made Easy - With eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, fr…
Sending a Secure fax is easy with eFax Corporate (http://www.enterprise.efax.com). First, Just open a new email message.  In the To field, type your recipient's fax number @efaxsend.com. You can even send a secure international fax — just include t…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question