Solved

How to Create a layer  Vlan for  IP Telephones

Posted on 2013-01-30
4
144 Views
Last Modified: 2013-10-25
I have a  Procurve v1910 switch that has  POE. At the Moment its on the deafult VLAN for all the ports. We have  are moving to POE IP Phones  which will use the same switch , 8 ports will be dedicated for VOIP and its own internet Router. How can I configure this on the  switch.
The Internet router will provide the DHCP for the phones.
0
Comment
Question by:thombie
  • 2
  • 2
4 Comments
 
LVL 36

Assisted Solution

by:ArneLovius
ArneLovius earned 500 total points
ID: 38839233
Confirm which ports the phones and their dedicated router will be connected to.
Add a new VLAN
Set the new VLAN as untagged on the 8 ports for the phones and a port for their dedicated router, set the nine ports as deny/no for the default VLAN

This can be done from the console, or the web interface
0
 

Author Comment

by:thombie
ID: 38839792
Is this Layer 2 VLAN ?
0
 
LVL 36

Accepted Solution

by:
ArneLovius earned 500 total points
ID: 38840145
From what you described " ports will be dedicated for VOIP", the phones would be on their own L2 VLAN.
0
 

Author Comment

by:thombie
ID: 38840589
thanks trying it now
0

Featured Post

DevOps Toolchain Recommendations

Read this Gartner Research Note and discover how your IT organization can automate and optimize DevOps processes using a toolchain architecture.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Decrypting SSL traffic in wireshark 7 91
Destination host unreachable 12 69
cisco switch stacking 6 53
Getting TNS:Connect timeout occurred while opening the application 5 59
I know for anybody starting from Beginner to Expert in Networking knows what OSI model. But this tutorial is for freshers or those who are new to networking world. Why I am putting OSI in such simple and compact manner is because it enables you to k…
Configuring network clients can be a chore, especially if there are a large number of them or a lot of itinerant users.  DHCP dynamically manages this process, much to the relief of users and administrators alike!
Viewers will learn how to properly install and use Secure Shell (SSH) to work on projects or homework remotely. Download Secure Shell: Follow basic installation instructions: Open Secure Shell and use "Quick Connect" to enter credentials includi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

895 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now