Solved

Allowing Buffalo Terastation TS-X8.0TL/R5 to talk over a Cisco ASA5505 Site to Site VPN

Posted on 2013-01-31
2
555 Views
Last Modified: 2013-05-22
I have a TS-X8.0TL/R5 NAS on each side of our site to site VPN connection.  Machines on the other side of the connection can see the local NAS, but I can't from my side.  I can remote into the windows PC's on the other side of the connection and can ping it and use its URL to access it.  Two ASA5505's do the site to site VPN duty.  On my side of the network the subnet is 10.2.3.X and gateway 10.2.3.2  on the other side is 10.2.5.x and 10.2.5.1.  Both sides use DNS servers 10.2.3.11 and 10.2.3.13.  I noticed that the NAS devices on both sides of the network don't show up in DNS. We always contact them via IP address.  Any help would be appreciated.  Router configs available if needed.
0
Comment
Question by:rcimasi
2 Comments
 
LVL 20

Accepted Solution

by:
rauenpc earned 500 total points
ID: 38842394
If the nas is on the same subnet as the pc you are able to rdp to, i would look to see that the nas default gateway is set correctly. Next i would check asa acl or nonat to make sure it isnt being blocked for some reason.
0
 

Author Comment

by:rcimasi
ID: 38842494
definitely not a gateway issue.  They match up properly on each side of the VPN.
0

Featured Post

Enabling OSINT in Activity Based Intelligence

Activity based intelligence (ABI) requires access to all available sources of data. Recorded Future allows analysts to observe structured data on the open, deep, and dark web.

Join & Write a Comment

Suggested Solutions

Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
How to update Firmware and Bios in Dell Equalogic PS6000 Arrays and Hard Disks firmware update.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

758 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now