Solved

2076 Warning Event Notification on IBM V7000

Posted on 2013-02-01
2
8,600 Views
Last Modified: 2013-02-04
I get the error below reported daily on V7000.  Can someone please explain what it is telling me??  The same mail comes twice - one for node ID 1 and one for node ID 2.

# Machine Location = V7000 SAN1, PRI DataCenter # Record Type = 902 # Machine Type = 2076124 # Serial Number = ******* # Error ID = 984003 : I/O group caching was set to synchronous destage # Error Code = # Software Version = 6.3.0.1 (build 54.6.1201270000) # FRU = None # Cluster Name = aaaa7000igrp0 # Node ID = 2 # Error Sequence Number = 657 # Timestamp = Fri Feb  1 01:58:27 2013 # Object Type = node # Object ID = 2 # Copy ID = # Additional Data (0 -> 63) = 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
# Additional Data (64 -> 127) = 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0
Comment
Question by:ni_ci
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
2 Comments
 
LVL 13

Accepted Solution

by:
Alexios earned 500 total points
ID: 38843373
Hello

Official explanation

The volume working set cache mode is in the process of changing to synchronous destage because the volume working set has too much pinned data.

http://pic.dhe.ibm.com/infocenter/storwize/ic/index.jsp?topic=%2Fcom.ibm.storwize.v7000.doc%2Fsvc_errorcodes_2nk8gq.html
0
 
LVL 13

Expert Comment

by:Alexios
ID: 38843383
I recommend to talk directly to IBM support mentioning Error ID = 984003 for further explanation and actions
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to update Firmware and Bios in Dell Equalogic PS6000 Arrays and Hard Disks firmware update.
This article shows how to use a free utility called 'Parkdale' to easily test the performance and benchmark any Hard Drive(s) installed in your computer. We also look at RAM Disks and their speed comparisons.
This video Micro Tutorial explains how to clone a hard drive using a commercial software product for Windows systems called Casper from Future Systems Solutions (FSS). Cloning makes an exact, complete copy of one hard disk drive (HDD) onto another d…
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

691 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question