?
Solved

Cisco Login Question and GNS3 Issue

Posted on 2013-02-02
3
Medium Priority
?
548 Views
Last Modified: 2013-02-19
Hello Experts,

Can someone please explain the following configuration on Cisco router? In particular what login authentication line does? Also what is the effect of adding both login authentication line and login tacacs?

Can an expert please tell me why I can't add login tacacs on GNS3 routers? I can only add login local.

Cheers

line vty 0 4
 exec-timeout 60 0
 timeout login response 90
 password 7 12518596
 login authentication line
 login tacacs
0
Comment
Question by:cpatte7372
3 Comments
 
LVL 20

Accepted Solution

by:
agonza07 earned 1000 total points
ID: 38847893
0
 
LVL 10

Assisted Solution

by:koudry
koudry earned 1000 total points
ID: 38895066
You need to define the login method in your AAA + TACACS section and you call it when you come to use it.  I have not tried the code below.  The other thing to bear in mind, is that GNS3 may not provide a full support for AAA and TACACS.

aaa authentication login default group tacacs+ enable
aaa authentication login group enable group tacacs+
aaa authentication login vtylogin group tacacs+ enable
!

line vty 0 4
 exec-timeout 60 0
 timeout login response 90
 login authentication vtylogin
!
0
 

Author Closing Comment

by:cpatte7372
ID: 38906051
cheers
0

Featured Post

Never miss a deadline with monday.com

The revolutionary project management tool is here!   Plan visually with a single glance and make sure your projects get done.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
This article is a guide to configure bridging on Cisco Routers.  This is something I never knew was possible until after making a few phone calls to Cisco.  Using bridging saved our company money by not requiring us to purchase a new switch.  Bridgi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

592 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question