Solved

FTP Problem... trying to ftp into my server

Posted on 2013-02-04
3
220 Views
Last Modified: 2013-02-09
Total Noob here...

I have started my first web server...

http://rubantin.gotdns.com:8080/

I am using DynDNS to follow the Dynamic DNS... I also have a phone router and wireless router in line and have had to forward port 8080 to port 80 of my server.

I just tried port forwarding 21 through my phone router>through my wireless router> to my werver IP but am getting nothing...

Russ
0
Comment
Question by:ambantin
  • 2
3 Comments
 
LVL 5

Expert Comment

by:tjc123
ID: 38852172
Does your FTP server have a software firewall installed?  You will need to open port 21 on that, as well.
Have you tried connecting to your FTP server while inside the same network, so you aren't going through any of your routers?

That link you have posted does not work for me:  http://rubantin.gotdns.com:8080/

This makes me think you have a software firewall in place on the FTP server.  Check that first and let me know.
0
 

Accepted Solution

by:
ambantin earned 0 total points
ID: 38852263
NVM - Don't need anything... My son shut the server down by accident at home....lol It is working fine....
0
 

Author Closing Comment

by:ambantin
ID: 38870827
error was at home
0

Featured Post

Backup Your Microsoft Windows Server®

Backup all your Microsoft Windows Server – on-premises, in remote locations, in private and hybrid clouds. Your entire Windows Server will be backed up in one easy step with patented, block-level disk imaging. We achieve RTOs (recovery time objectives) as low as 15 seconds.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In Solr 4.0 it is possible to atomically (or partially) update individual fields in a document. This article will show the operations possible for atomic updating as well as setting up your Solr instance to be able to perform the actions. One major …
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

895 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now