Solved

Cisco 3750x switch with added 4 x Gig fiber card

Posted on 2013-02-05
2
904 Views
Last Modified: 2013-02-05
Greetings,
I have several 3750x series switches with an add on card that has 4 gig fiber ports. The card shows slot gi1/1/1 as a 1 gig fiber, slot gi1/1/2 as a 1 or 10 gig fiber, slot 1/1/3 as a 1 gig fiber and slot gi1/1/4 as a 1 or 10 gig fiber. My question is, can I use all 4 ports?

I am planning a build out of some fiber, but if I am wondering if I use the two 10 gig ports as 10 gig ports, will that make the two 1 gig ports unavailable?

Ideally, I want to use gi1/1/1 as a 1 gig port and gi1/1/2 as a 10 gig and gi1/1/3 as a 1 gig and gi1/1/4 as a 10gig. Will this work?

Thanks.
0
Comment
Question by:erocon
2 Comments
 
LVL 20

Accepted Solution

by:
agonza07 earned 500 total points
ID: 38855892
They work in pairs, either you go 2 10Gig or 4 1Gig. You can also go, 1 10Gig and 2 1Gig.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/hardware/install/notes/net_mod_note.html

The module has four slots. Two slots support only 1-Gigabit SFP modules. Two slots support either 1-Gigabit SFP or 10-Gigabit SFP+ modules.
 
Note The GLC-T SFP is not supported on the SFP+ slots of C3KX-NM-10G.

The four slots are grouped as two pairs, with each pair consisting of one SFP slot and one SFP+ slot. Each pair supports either two 1-Gigabit SFP modules or one 10-Gigabit SFP+ module. A 10-Gigabit SFP+ module cannot operate at the same time as the corresponding 1-Gigabit SFP module in the pair.
0
 

Author Closing Comment

by:erocon
ID: 38858174
Excellent answer and reference!
0

Featured Post

Courses: Start Training Online With Pros, Today

Brush up on the basics or master the advanced techniques required to earn essential industry certifications, with Courses. Enroll in a course and start learning today. Training topics range from Android App Dev to the Xen Virtualization Platform.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

I see many questions here on Experts Exchange regarding switch port configurations and trunks. This article is meant for beginners in the subject to help to get basic knowledge about Virtual Local Area Network (VLAN (http://en.wikipedia.org/wiki/Vir…
This tutorial will go through the steps required to write a script that will back up the configuration settings of a HP-ProCurve switch. You will need to get the following things to follow this tutorial: Telnet Scripting Tool e.g. TST10.exe …
Although Jacob Bernoulli (1654-1705) has been credited as the creator of "Binomial Distribution Table", Gottfried Leibniz (1646-1716) did his dissertation on the subject in 1666; Leibniz you may recall is the co-inventor of "Calculus" and beat Isaac…
A short tutorial showing how to set up an email signature in Outlook on the Web (previously known as OWA). For free email signatures designs, visit https://www.mail-signatures.com/articles/signature-templates/?sts=6651 If you want to manage em…

786 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question